EasyManuals Logo

Moxa Technologies NPORT 6150 User Manual

Moxa Technologies NPORT 6150
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
NPort 6000 Series System Configuration Settings
9-4
Refer to the following table for more configuration examples.
Allowed hosts Entered IP address/Netmask
Any host Disable
192.168.1.120 192.168.1.120 / 255.255.255.255
192.168.1.1 to 192.168.1.254 192.168.1.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254 192.168.0.0 / 255.255.0.0
192.168.1.1 to 192.168.1.126 192.168.1.0 / 255.255.255.128
192.168.1.129 to 192.168.1.254 192.168.1.128 / 255.255.255.128
Host Table
The Host Table may be used to simplify IP address entry on the NPort 6000 console by assigning a Host Name
to a Host IP Address. When you assign a Host Name to a Host IP Address, you may then use the Host Name for
some fields on the console rather than entering the IP address. Up to 16 entries can be stored on the Host
Table.
Firmware Upgrade
The NPort 6000’s firmware can be upgraded though the web console, serial console, or through NPort Search
Utility. If you have made any changes to your configuration, remember to save the configuration first before
upgrading the firmware. Please refer to Save Configuration later in this chapter for more information. Any
unsaved changes will be discarded when the firmware is upgraded. To upgrade the firmware, simply enter the
file name and click Submit. The latest firmware can be downloaded at www.moxa.com
.

Table of Contents

Other manuals for Moxa Technologies NPORT 6150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies NPORT 6150 and is the answer not in the manual?

Moxa Technologies NPORT 6150 Specifications

General IconGeneral
Display-
Baud rate921.6 Kbit/s
Data bits5, 6, 7, 8
Isolation1.5 kV
Stop bits1, 1.5, 2
RS-232 signalsCTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signalsGND, RxD+, RxD-, TxD+, TxD-
RS-485 signalsData+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow Control typeRTS/CTS, XON/XOFF
Flow control supportYes
Serial interface typeRS-232, RS-422, RS-485
Serial ports quantity1
Ethernet LAN data rates10, 100 Mbit/s
Surge protection voltage0.5 kV
Mean time between failures (MTBF)2097705 h
Cabling technology10/100Base-T(X)
USB 2.0 ports quantity0
Built-in processorNo
Input voltage12 - 48 V
Power consumption285 mA
Power source typeDC
Storage temperature (T-T)-40 - 75 °C
Maximum operating altitude2000 m
Operating temperature (T-T)0 - 55 °C
Operating relative humidity (H-H)5 - 95 %
Supported network protocolsICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security algorithmsAES, DES, SSH, SSL/TLS
Product colorBlack, Blue, Grey
Housing materialMetal
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Weight700 g
Dimensions (WxDxH)67 x 100.4 x 29 mm

Related product manuals