Moxa Technologies NPORT 6150 User Manual

NPort 6000 Series Introduction
1-5
Product Specifications
NPort 6150
Ethernet Interface
Number of Ports:
1
Speed:
10/100 Mbps, auto MDI/MDIX
Connector:
8-pin RJ45
Magnetic Isolation:
1.5 KV built-in
Serial Interface
Number of Ports:
1
Serial Standards:
RS-232/422/485
Connector:
DB9 male
RS
-485 Data Direction Control: ADDC® (Automatic Data Direction Control)
Console Port:
Serial port doubles as RS-232 console port
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, DTR/DSR, XON/XOFF, RTS Toggle
Baudrate:
50 bps to 921.6 kbps (supports nonstandard baudrates)
Pull High/Low Resistor for RS-485: 1 KΩ, 150 KΩ
Serial Signals
RS
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS
-422: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-2w: Data+, Data-, GND
Software
Network Protocols:
ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP,
ARP, PPPoE
, HTTPS
Security Protocols:
SSLv3, TLSv1.0/1.1/1.2
Configuration Options:
Web Console, Serial Console, Telnet Console, Windows Search Utility
Windows Real COM
Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/10
x86/x64,
2012 x64, Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers:
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6,
Solaris 10, FreeBSD, AIX 5.x
Linux R
eal TTY Drivers: Linux kernel 2.4.x, 2.6.x, 3.x
Management: SNMP MIB-II
IP Routing:
Static, RIP-I, RIP-II
Operation Modes
Standard:
Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet,
Ethernet Modem, Printer, PPP, Disabled
Secure:
Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH
Applications
Terminal Sessions:
8 sessions per port
Physical Characteristics
Housing:
Metal
Weight:
700 g (1.54lb)
Dimensions:
Without ears: 67 x 100.4 x 28 mm (2.64 x 3.95 x 1.1 in)
With ears: 90 x 100.4 x 28 mm (3.54 x 3.95 x 1.1 in)

Moxa Technologies NPORT 6150 Specifications

General

Display	-
Baud rate	921.6 Kbit/s
Data bits	5, 6, 7, 8
Isolation	1.5 kV
Stop bits	1, 1.5, 2
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signals	GND, RxD+, RxD-, TxD+, TxD-
RS-485 signals	Data+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow Control type	RTS/CTS, XON/XOFF
Flow control support	Yes
Serial interface type	RS-232, RS-422, RS-485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Surge protection voltage	0.5 kV
Mean time between failures (MTBF)	2097705 h
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Built-in processor	No
Input voltage	12 - 48 V
Power consumption	285 mA
Power source type	DC
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security algorithms	AES, DES, SSH, SSL/TLS
Product color	Black, Blue, Grey
Housing material	Metal
Sustainability certificates	RoHS

Weight and Dimensions

Weight	700 g
Dimensions (WxDxH)	67 x 100.4 x 29 mm