EasyManuals Logo

Moxa Technologies NPORT 6150 User Manual

Moxa Technologies NPORT 6150
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
NPort 6000 Series Introduction
1-3
CBL-RJ45M9-150: 8-pin RJ45 to DB9 male connection cable, 150 cm
Power cord (AC models only)
2 rackmount ears
Software and documentation CD
Quick installation guide (printed)
Warranty card
Cable Accessories for the NPort 6610 and NPort 6650 (can be purchased separately)
CBL-RJ45M9-150 (8-pin RJ45-to-male DB9 cable; 150 cm)
CBL-RJ45F9-150 (8-pin RJ45-to-female DB9 cable; 150 cm)
CBL-RJ45M25-150 (8-pin RJ45-to-male DB25 cable; 150 cm)
CBL-RJ45F25-150 (8-pin RJ45-to-female DB25 cable; 150 cm)
Extension Modules for the NPort 6450 and NPort 6600 (can be purchased separately)
NM-TX01/NM-TX01-T: Network module with one 10/100BaseTX Ethernet port (RJ45 connector; supports
cascade redundancy)
NM-TX02/NM-TX02-T: Network module with two 10/100BaseTX Ethernet ports (RJ45 connector; supports
cascade redundancy)
NM-FX01-S-SC/NM-FX01-S-SC-T: Network module with one 100BaseFX single-mode fiber port (SC
connector; supports cascade redundancy)
NM-FX02-S-SC/NM-FX02-S-SC-T: Network module with two 100BaseFX single-mode fiber ports (SC
connectors; supports cascade redundancy)
NM-FX01-M-SC/NM-FX01-M-SC-T: Network module with one 100BaseFX multimode fiber port (SC
connector; supports cascade redundancy)
NM-FX02-M-SC/NM-FX02-M-SC-T: Network module with two 100BaseFX multimode fiber ports (SC
connectors; supports cascade redundancy)
NPort 6150, NPort 6250, and NPort 6450
One model of the NPort 6150, three models of the NPort 6250, and one model of the NPort 6450 are available:
Model Name Number of Serial Ports Power Requirements
NPort 6150/6150-T 1 100-240 VAC, adapter
NPort 6250/6250-T 2 100-240 VAC, adapter
NPort 6250-M-SC/6250-M-SC-T 2 100-240 VAC, adapter
NPort 6250-S-SC/6250-S-SC-T 2 100-240 VAC, adapter
NPort 6450/6450-T 4 100-240 VAC, adapter
Standard Accessories for the NPort 6150 and NPort 6250
Software and documentation CD
Quick installation guide
Power adapter (standard temp. models only)
Product warranty statement
2 attachable wall-mount ears
DIN-Rail Accessories for the NPort 6150, NPort 6250, and NPort 6450 (can be purchased
separately)
DK-35A DIN-rail mounting kit (35 mm)
DIN-rail power supply
Product Features
All models in the NPort 6000 series have the following features:
Secure data access modes, including Secure Real COM, Secure TCP Server, Secure TCP Client, and Secure
Pair Connection

Table of Contents

Other manuals for Moxa Technologies NPORT 6150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies NPORT 6150 and is the answer not in the manual?

Moxa Technologies NPORT 6150 Specifications

General IconGeneral
Display-
Baud rate921.6 Kbit/s
Data bits5, 6, 7, 8
Isolation1.5 kV
Stop bits1, 1.5, 2
RS-232 signalsCTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signalsGND, RxD+, RxD-, TxD+, TxD-
RS-485 signalsData+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow Control typeRTS/CTS, XON/XOFF
Flow control supportYes
Serial interface typeRS-232, RS-422, RS-485
Serial ports quantity1
Ethernet LAN data rates10, 100 Mbit/s
Surge protection voltage0.5 kV
Mean time between failures (MTBF)2097705 h
Cabling technology10/100Base-T(X)
USB 2.0 ports quantity0
Built-in processorNo
Input voltage12 - 48 V
Power consumption285 mA
Power source typeDC
Storage temperature (T-T)-40 - 75 °C
Maximum operating altitude2000 m
Operating temperature (T-T)0 - 55 °C
Operating relative humidity (H-H)5 - 95 %
Supported network protocolsICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security algorithmsAES, DES, SSH, SSL/TLS
Product colorBlack, Blue, Grey
Housing materialMetal
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Weight700 g
Dimensions (WxDxH)67 x 100.4 x 29 mm

Related product manuals