Moxa Technologies NPORT 6150 User Manual

NPort 6000 Series Configuration with the Web Console
5-4
Opening the Web Console
Open your web browser and enter 192.168.127.254 in the website address line. This is the default IP address
for the NPort 6000–if a new address has been assigned, enter the new address instead. Press ENTER to load
the page.
ATTENTION
The examples and figures in this chapter use the NPort 6000 factory default IP address of 192.168.127.254.
If you have assigned a different IP address to your NPort 6000, be sure to adjust accordingly when following
these directions. Please refer to Chapte
r 3, Initial IP Address Configuration
, for details on how to configure the
IP address.
The default login username is admin and the default password is moxa.
ATTENTION
If you forget your password, the ONLY way to configure the NPort 6000 is by using the reset button to reset
all settings and load the factory defaults. If you have disabled the reset button in your NPort 6000
configuration, you may still use it to load the factory defaults within the first 60 seconds
that the NPort 6000
is powered on.
Remember to back up your configuration by exporting it to a file. Your configuration can be easily restored by
importing the file to the NPort 6000. This will save time if you have forgotten the password and need to reload
the factory defaults.
The NPort 6000’s web console will appear after logging in.

Moxa Technologies NPORT 6150 Specifications

General

Display	-
Baud rate	921.6 Kbit/s
Data bits	5, 6, 7, 8
Isolation	1.5 kV
Stop bits	1, 1.5, 2
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signals	GND, RxD+, RxD-, TxD+, TxD-
RS-485 signals	Data+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow Control type	RTS/CTS, XON/XOFF
Flow control support	Yes
Serial interface type	RS-232, RS-422, RS-485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Surge protection voltage	0.5 kV
Mean time between failures (MTBF)	2097705 h
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Built-in processor	No
Input voltage	12 - 48 V
Power consumption	285 mA
Power source type	DC
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security algorithms	AES, DES, SSH, SSL/TLS
Product color	Black, Blue, Grey
Housing material	Metal
Sustainability certificates	RoHS

Weight and Dimensions

Weight	700 g
Dimensions (WxDxH)	67 x 100.4 x 29 mm