Moxa Technologies NPORT 6150 User Manual

7
7. Configuring Serial Port Operation Modes
In this chapter, we explain how to configure the individual serial port modes.
The following topics are covered in this chapter:

Port Setting Basics

Device Control Applications
 Real COM Mode
 Reverse Real COM Mode
 RFC2217 Mode

Socket Applications
 TCP Server Mode
 TCP Client Mode
 UDP Mode

Pair Connection Mode
 Pair Connection Master Mode
 Pair Connection Slave Mode

Ethernet Modem Mode

Terminal Applications
 Terminal ASCII (TERM_ASC)
 Terminal BIN (TERM_BIN)
 SSH

Reverse Terminal Applications
 Reverse Telnet Mode
 Reverse SSH Mode

Printer Applications
 RAW PRN Mode
 LPD PRN Mode

Dial In/Out Applications
 PPP Mode
 PPPD Mode
 SLIP Mode
 SLIPD Mode
 Dynamic Mode

Disabled Mode

Moxa Technologies NPORT 6150 Specifications

General

Display	-
Baud rate	921.6 Kbit/s
Data bits	5, 6, 7, 8
Isolation	1.5 kV
Stop bits	1, 1.5, 2
RS-232 signals	CTS, DCD, DSR, DTR, GND, RTS, Rx, Tx
RS-422 signals	GND, RxD+, RxD-, TxD+, TxD-
RS-485 signals	Data+, Data-, GND, RxD+, RxD-, TxD+, TxD-
Flow Control type	RTS/CTS, XON/XOFF
Flow control support	Yes
Serial interface type	RS-232, RS-422, RS-485
Serial ports quantity	1
Ethernet LAN data rates	10, 100 Mbit/s
Surge protection voltage	0.5 kV
Mean time between failures (MTBF)	2097705 h
Cabling technology	10/100Base-T(X)
USB 2.0 ports quantity	0
Built-in processor	No
Input voltage	12 - 48 V
Power consumption	285 mA
Power source type	DC
Storage temperature (T-T)	-40 - 75 °C
Maximum operating altitude	2000 m
Operating temperature (T-T)	0 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Supported network protocols	ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE
Security algorithms	AES, DES, SSH, SSL/TLS
Product color	Black, Blue, Grey
Housing material	Metal
Sustainability certificates	RoHS

Weight and Dimensions

Weight	700 g
Dimensions (WxDxH)	67 x 100.4 x 29 mm