NPort 6000 Series Administration Settings
Password: Use this field to set the password for the specified level of access.
Privacy: Use this field to define the encryption key for the specified level of access
Authentication Server
RADIUS server IP: If you are using a RADIUS server for user authentication, enter its IP address here.
RADIUS key: If you are using a RADIUS server for user authentication, enter its password here.
UDP port (default=1645): If you are using a RADIUS server, enter its UDP port assignment here.
RADIUS accounting: Use this field to enable or disable RADIUS accounting.
TACACS+ server: If you are using a TACACS+ server for user authentication, enter its IP address or domain
name here.
TACACS+ secret: If you are using a TACACS+ server for user authentication, enter its password here.
TACACS+ accounting: Use this field to enable or disable TACACS+ accounting.
Console Setting
To Next Page
Loading...
