OnCell G3100 Series Cellular Network Settings
GSM GPRS Settings (For OnCell G3110 and
G3150)
From the left navigation panel, click Network Settings
GSM GPRS Settings to configure the
GSM/GPRS/SMS Settings. The various configuration items are described below:
Type: The OnCell G3100 supports 3 types of operation modes. You may choose from GSM, GPRS, and SMS.
SIM PIN: This is a pin code that locks the SIM card until you enter the correct code. Use the pin to protect your
account. The default code is set by the Service Provider. Note that a cell phone must be used to change the PIN.
Selecting the Radio Band: Although GSM-900 and GSM-1800 are used in most parts of the world, operators
in United States, Canada, and many other countries in the Americas use GSM-850 or GSM-1900. The
GSM/GPRS band of GSM/GPRS/EDGE module is configured to auto by default.
Additional settings for each of the three modes are described in the following subsections.
Cellular Setting (OnCell G3110-HSPA and OnCell
G3150-HSPA)
From the left navigation panel, click Network Settings
Cellular Settings to configure the
GSM/GPRS/EDGE/UMTS/HSPA/SMS Settings. The various configuration items are described below:
Type: The OnCell G3100 supports 3 types of operation mode. You may choose from GSM (CSD),
GPRS/EDGE/UMTS/HSPA, and SMS.
To Next Page
Loading...
Need help?
General
