Moxa Technologies OnCell G3100 - GPRS Via at Command; GPRS Via Windows Dial-Up Network

OnCell G3100 Series Configuring Virtual Modem Mode
10-9
GPRS via AT command
You can connect to the Internet (GPRS) via AT command. There are two commands you need to know:
APN: AT+CGDCONT=1,”IP”,”<APN>”
Dial: ATD*99***1#
GPRS via Windows Dial-up Network
1. Go to Start

Settings

Control Panel

Phone and Modem Options.
2. Click on Add button.