OnCell G3100 Series System Management Settings
Save Configuration
Go to Save Configuration and then click Save to save your submitted configuration changes to the OnCell
G3100’s flash memory. The configuration changes will be effective when the OnCell G3100 is restarted. If you
do not save your changes before restarting, they will be discarded.
Restart
Restart System
Go to Restart System under Restart and then click Restart to restart the OnCell G3100. Ensure that you
save all of your configuration changes before you restart the system or else these changes will be lost.
Restart Ports
Go to Restart Ports under Restart and then select the ports to be restarted. Click Select All to select all the
ports. Click Submit to restart the selected ports.
To Next Page
Loading...
Need help?
General
