OnCell G3100 Series Configuring the Cellular-Enabling Ethernet Device
Host to OnCell via Cellular
Go to System Management
Misc. Network Settings
Virtual Server Settings (default=Disable): This
function allows remote users to access the Host or FTP services via a public IP address, and automatically
redirects them to local servers in the LAN (Local Area Network).
The OnCell firewall feature filters out unrecognized packets to protect your LAN network when computers
networked with the OnCell are hidden from public view. If you wish, you can make some of the LAN computers
accessible from the Internet by enabling Virtual Server. Depending on the requested service, the OnCell
redirects the external service request to the appropriate server within the LAN network.
The OnCell is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to
a different port on the server computer.
Public Port: The public port is the port seen from the Internet side. Public ports cannot be set to ports used by
OP modes (950, 966, 4001, …)
Internal IP: Enter the IP address of the host on your local network that you want to link the incoming service
to.
Internal Port: The internal port is the port being used by the application on the host within your local network.
To Next Page
Loading...
Need help?
General
