OnCell G3100 Series Understanding and Configuring a VPN
VPN system log events and error codes
VPN system log Description
VPN init. VPN tunnel initial
VPN init. by packet VPN tunnel initial by packet driven
VPN stop VPN tunnel stop
VPN phase2 SA time out VPN tunnel phase 2 security association time out
VPN time out VPN tunnel connect time out
VPN has mismatched proposal VPN tunnel proposal not match
VPN disconnected by change WAN IP VPN tunnel disconnected by change WAN IP
VPN disconnected by DPD VPN disconnected by Dead peer detection
VPN start phase1 main mode connect VPN tunnel start phase 1 main mode connect
VPN start phase1 aggr. mode connect VPN tunnel start phase1 aggressive mode connect
VPN start encryption VPN tunnel start encryption
VPN phase1 pass VPN tunnel phase 1 pass
VPN phase2 pass VPN tunnel phase 2 pass
VPN Error Code 0001 ~ 0030 VPN tunnel others error code
Note: For details refer to "Notify Messages - Error Types" in
http://docbox.etsi.org/Reference/IETF/RFC/RFC2408.pdf
VPN phase2 renew key VPN tunnel phase 2 renew key
VPN phase2 renew key success VPN tunnel phase 2 renew key success
VPN phase1 SA time out VPN tunnel phase 1 security association time out
VPN phase1 key(ISAKMP) deleted by remote VPN tunnel phase 1 key(ISAKMP) deleted by remote
VPN phase2 key(ESP) deleted by remote VPN tunnel phase 2 key(ESP) deleted by remote
To Next Page
Loading...
Need help?
General
