Replacing Parts
Graphical Endorser
NCR iTRAN 180es/300es/600 Operator’s Guide 4-37
3 Flip down the green locking arm at the back of the cartridge.
4 Tilt up slightly the back of the ink cartridge and pull it out.
Note: Most used cartridges will still have some ink remaining. (They must
not run dry.)
Warning: This ink is poisonous to animals and small children. Dispose of or recycle
the used cartridge according to your local policies.
Caution: Do not drop or squeeze the new cartridge, or bump the cartridge head. Rough
handling may stop the cartridge from printing.
5 Remove the new cartridge from its box.
6 Remove the shipping clip (if present) from the cartridge.
7 Use the pull-tab to remove the sealing tape from the cartridge.
To Next Page
Loading...