Cleaning the Transport
Display Monitor
3-22 NCR iTRAN 180es/300es/600 Operator’s Guide
Display Monitor
3
Cleaning the Display
3
The following tips will help keep your display monitor functioning at the
optimal level.
Caution: To avoid risk of electric shock, do not disassemble. The unit is not user
serviceable. Remember to unplug the display unit from the power outlet
before cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent.
• Do not use thinner or benzene, abrasive cleaners or compressed air.
• To clean the display unit cabinet, use a cloth lightly dampened with a
mild detergent.
• Avoid getting liquids inside your monitor. If liquid does get inside, have
a qualified service technician check it before you power it on again.
• Do not wipe the screen with a cloth or sponge that could scratch the
surface.
• To clean the screen, use window or glass cleaner. Put the cleaner on
the rag and wipe the screen.
Caution: Never apply the cleaner directly on the screen
For further information, see your supervisor or the manual that came with
your monitor.
To Next Page
Loading...