iNCR iTRAN 180es/300es/600 Operator’s Guide
Preface
About this Guide
This guide tells you how to maintain the iTRAN 180es/300es/600
Item Processing Transport.
First it gives a guided tour of the transport.
Then it tells how to handle documents on this transport, how to clean it, and
how to replace the operator replaceable parts on it.
Finally, this guide tells how to order supplies for the transport.
Who this Guide is For
This guide is for operators of the transport - those people who clean the
station and replace such media as ink ribbons.
Conventions
This guide uses the following conventions to help you identify different types
of information:
Key names: Names of keys on the keyboard are printed in a special typeface,
like this:
Alt, PgUp, Tab, Spacebar. If you have to press two keys at the same
time, the key names have a plus sign between them (for example,
Ctrl+F2).
Special information: Notes, cautions, and warnings alert you to different
types of special information. Each is printed in a different way:
Notes contain information that has special importance.
Caution: Cautions alert you to procedures or conditions that could damage equipment
or data.
Warning: Warnings alert you to procedures or conditions that could cause
personal injury.
Related Information
For additional information, refer to:
NCR iTRAN 180es/300es/600 Product Information B004-0000-0427
Note: Older model transport information (180e/300e variants) is covered in
version 02.00.01 of this manual available through IPP. Visit:
http://infocentral.daytonoh.ncr.com/home.cfm
To Next Page
Loading...