-1NCR iTRAN 180es/300es/600 Operator’s Guide 4
Chapter 4
Replacing Parts
Overview
About This Chapter
4
This chapter tells you how to replace the following operator replaceable parts
on the iTRAN 180es/300es/600 Item Processing Transport:
• supplies that get used up, such as the encoder ribbon, journal paper and
endorser ink
• parts that wear out in normal use, such as the plastic strips on the pockets
Each procedure in this chapter tells you what supplies you need when
replacing an item.
Note: For the part numbers to use when ordering supplies, see Chapter 5,
“Ordering Supplies”.
To Next Page
Loading...