NEC Express5800 Series User Manual

4-26 System Configuration
Boot
Move the cursor onto "Boot" to display the Boot menu.
The server searches for the boot device according to the order specified in this menu and use the
software to boot the system if found.
You can change the boot device order using
n
or
p
and + or –. Move the cursor to select the device
by
n
or
p
, and then change the priority using + or –.
IMPORTANT:
Specify the device boot order as shown above to start the NEC EXPRESSBUILDER.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)