NEC Express5800 Series User Manual

Troubleshooting 7-37
COLLECTION OF TROUBLE LOGS
In the event of trouble, you can get information in the procedures described below:
IMPORTANT:
 You can perform the procedures described below only when you are asked by your
maintenance personnel to get trouble logs.
 When the system restarts after the trouble, it may show a message that there is a shortage of
virtual memory. However, continue the system startup. If you reset and restart the system,
you cannot get correct information.
Collection of syslog
The log file of Linux is created under the following directory in text format:
/var/log/
The log file of NEC Express5800/ft series is also created in this directory, as with general log file
of Linux.
Collection of System Information
The system information of Linux is recorded in syslog, etc.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)