NEC Express5800 Series User Manual

6-2 Maintenance
DAILY MAINTENANCE
To use your NEC Express5800/ft series in best condition, check and maintain regularly as described
below. If an error is found on your NEC Express5800/ft series, consult your sales agent.
Checking Alert
Monitor the failure occurrence by NEC ESMPRO during the system operation.
Always check whether any alert is reported to NEC ESMPRO Manager on the management PC.
Check whether any alert is reported on the Operation Window, Data Viewer, or Alert Viewer of
NEC ESMPRO Manager.
Viewers of NEC ESMPRO
Operation Window Alert Viewer
Data Viewer
Checking STATUS LEDs
Check the LED indication on the front of the NEC Express5800/ft series, on hard disks installed in
3.5-inch hard disk drive bay, or on LCD display when the server is powered on or powered off by
the shut down operation. The functions and indications of LEDs are described in Chapter 2. If any
indication that shows an error, contact your sales agent.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)