NEC Express5800 Series User Manual

5-40 Installing and Using Utilities
Server Maintenance Utility
Server Maintenance Utility is a tool for managing server operation. It is used to configure operation
patterns, to check status at replacement of parts, and to instruct operations.
 How to start NEC ESMPRO Agent Server Maintenance Utility that is installed on NEC
Express5800/ft series server
1. Go to the installation destination of NEC ESMPRO Agent.
The default installation destination of NEC ESMPRO Agent is /opt/nec/esmpro_sa. Here,
the destination is assumed to be /opt/nec/esmpro_sa.
2. Go to the storage location of Server Maintenance Utility:
cd bin
3. Start the tool:
./svmtnutl
 For using the Server Maintenance Utility in Japanese, run the command below before starting
it. This command starts X Window and the screen will be displayed in the Japanese fonts.
init 5
If you star the Server Maintenance Utility without starting the X Window, messages displayed
on the console may affect the screen display. If the screen is not displayed properly, press Ctrl
+ L to refresh the screen.
㩷
Screen Layout
Tree view: Information display view
Component screen: Displays information of the item that you selected in the tree in a new window.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)