NEC Express5800 Series User Manual

General Description 2-29
Installing/Removing the Front Bezel
When you power on/off the server, operate the CD-ROM drive, or remove/install a hard disk drive
or CPU/IO module, remove the front bezel.
IMPORTANT:
Front bezel cannot be opened without inserting the attached security key into the slot to
release the lock.
1. Insert the security key into the slot and turn it left with a little pressure to release the lock.
2. Hold the right side of the front bezel lightly and pull it toward you.
3. Detach the front bezel from the main unit by sliding it to the left a little to disengage the
tabs from the frame.
To attach the front bezel, engage the tabs on the frame on the left side of the main unit.
After attaching and closing the front bezel, lock it with the key for security.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)