NEC Express5800 Series User Manual

Troubleshooting 7-13
Linux Error Messages
NEC Express5800/ft series displays messages on the console window when failures occur. Also, the
same information is recorded as system logs.
The following indicates the syslog messages, messages on the console, their meanings and actions:
Message Meaning Action
The driver started successfully. The driver was successfully
started.
The driver stopped. The driver was successfully
terminated.
The server is operating
normally.
The driver failed to start. The driver was not started
successfully.
There may be problem in
the system environment.
Contact your sales agent.
The driver finished successfully
to unload.
The unload processing of the
driver finished successfully.
The driver accepted to bind the
CPU module.
The driver received an instruction
to bind the CPU module.
The driver started to bind the
CPU module.
The driver started binding the
CPU module.
The friver finished successfully
to bind the CPU module.
The driver successfully bound
the CPU module.
The server is operating
normally.
The driver failed to bind the
CPU module.
The driver was unsuccessful to
bind the CPU module.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
The driver accepted to remove
the CPU module.
The driver received an instruction
to disconnect the CPU module.
The driver started to remove
the CPU module.
The driver started disconnecting
the CPU module.
The driver finished successfully
to remove the CPU module.
The driver successfully
disconnected the CPU module.
The server is operating
normally.
The driver failed to remove the
CPU module.
The driver was unsuccessful to
remove the CPU module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver started the fast
re-sync function of the CPU
module.
The driver started performing fast
re-sync to the CPU module.
The driver finished successfully
the fast re-sync function of the
CPU module.
The driver successfully
performed fast re-sync to the
CPU module.
The server is operating
normally.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)