NEC Express5800 Series User Manual

7-14 Troubleshooting
Message Meaning Action
The driver failed the fast resync
function of the CPU module.
The driver was unsuccessful to
perform fast re-sync to the CPU
module.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
The driver accepted to change
the priority of the CPU module.
The driver received an instruction
to change the priority of the CPU
module.
The driver started to change the
priority of the CPU module.
The driver started changing the
priority of the CPU module.
The driver finished to change
the priority of the CPU module.
The driver successfully changed
the priority of the CPU module.
The server is operating
normally.
The driver failed to change the
priority of the CPU module.
The driver was unsuccessful to
change the priority of the CPU
module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver accepted to bind the
IO module.
The driver received an instruction
to bind the IO module.
The driver started to bind the IO
module.
The driver started binding the IO
module.
The driver finished successfully
to bind the IO module.
The driver successfully bound
the IO module.
The server is operating
normally.
The driver failed to bind the IO
module.
The driver was unsuccessful to
bind the IO module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver accepted to remove
the IO module.
The driver received an instruction
to disconnect the IO module.
The driver started to remove
the IO module.
The driver started disconnecting
the IO module.
The driver finished successfully
to remove the IO module.
The driver successfully
disconnected the IO module.
The server is operating
normally.
The driver failed to remove the
IO module.
The driver was unsuccessful to
disconnect the IO module.
There may be problem of
hardware environment.
Contact your sales agent.
The driver accepted to switch
Primary/Secondary state of the
IO module.
The driver received an instruction
to change the primary/secondary
state of the IO module.
The driver started to switch
Primary/Secondary state of the
IO module.
The driver started changing the
primary/secondary state of the IO
module.
The server is operating
normally.
The driver finished successfully
to switch Primary/Secondary
state of the IO module.
The driver successfully changed
the primary/secondary state of
the IO module.
The server is operating
normally.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)