NEC Express5800 Series User Manual

Troubleshooting 7-3
ERROR MESSAGES
If the NEC Express5800/ft series enters the abnormal state, the error is posted by various means.
This section explains the types of error messages.
Error Messages by LED Indication
The LEDs on the front and rear panels of the NEC Express5800/ft series and near the handles of
hard disks inform the user of the various server statuses by the colors and the patterns of going on,
going off, and flashing. If trouble seems to have occurred, check the LED indication. For the LED
indication and meanings, see page 2–22 “LEDs.”
This User’s Guide describes actions to be taken for watch error message. However, if replacement
of modules is necessary, contact your sales agent.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)