NEC Express5800 Series User Manual

Linux Setup and Operation 3-11
Notes
z X server that supports the ft feature always operates in the same video mode as the
console.
z The Xrandr feature is not supported. You cannot change screen resolution from X
server.
z “IPMI Management Utility” cannot be used.
z “OpenIPMI” cannot be used.
z For using X on the console, run the system at the run level 5 and perform graphical
logon. If X is not started at the system startup (run level 3), log on as root and enter
“init 5” to the command line on thte text console to start X.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)