NEC Express5800 Series User Manual

8-14 System Upgrade
ᴾ
Installing 5.25-inch Device
1. See page 8-4 to prepare for installation.
2. Loosen screws to remove the side cover.
3. Loosen screws to remove the tray for adding devices.
4. Remove the four screws securing the dummy cover,
and remove the dummy cover.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)