System Configuration 4-29
Discard Changes
Select this option if you want to restore
previous values before saving values in CMOS.
When you select “Discard Changes,” you will
see the dialogue box as shown on the right.
If you select “Yes” in the dialogue box,
changes you have made are discarded and
previous settings are restored.
Save Changes
Select this option if you want to save changes
you have made in CMOS (non-volatile
memory) without exiting SETUP. When you
select the Save Changes, you will see the
dialogue box as shown on the right.
If you select “Yes” in the dialogue box,
changes you have made are saved in CMOS
(non-volatile memory).
To Next Page
Loading...
