NEC Express5800 Series User Manual

4-36 System Configuration
SCSI Disk Utilities
SCSI Disk Utilities scans a device connected to the selected channel and displays information on the
device. If the device is a hard disk drive, you can perform low-level formatting or verification.
When you choose “SCSI Disk Utilities” in the “Options” menu, which is shown after selecting a
channel to be configured, the screen for scanning SCSI IDs is displayed.
After the scanning the screen showing SCSI IDs and corresponding devices appears.
When you select a device on this screen and press the Enter key, details of the device is shown.
If the selected device is a hard disk drive, you can execute the following submenus.
z Format Disk: performs low-level formatting for the selected device
z Verify Disk Media: compares (verifies) all sectors of the selected device and if there is any bad
sector, re-assignment will be performed.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)