4-68 System Configuration
WEB server settings
Here you can make web server settings such as HTTP port settings for the BMC.
When you click [Web Server] on the left pane of the BMC configuration window, the right pane
shows the overall information of the web server settings.
IMPORTANT:
When you change the HTTP port number, settings of SSL (enable/disable), or SSL port
number, the current connection will be temporarily disconnected. Close the window and
exit, and then log on again by entering the newly set port number in the browser.
The logon page remaining on the browser is the page you accessed by using old web server
settings. You cannot use it to log on.
To Next Page
Loading...
