NEC Express5800 Series User Manual

System Configuration 4-75
Firmware Update
You can update applets, KVM firmware, BMC firmware, sensor device information (SDR), and
platform information (PIA).

Starting up the firmware update window
When you click the icon to start up firmware update [
] on the control panel, each pieces of
revision information is loaded from the BMC to display the following firmware update window.

If you click [Cancel], the firmware update window closes without making any changes.
The following pages provide step-by-step instructions for update.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)