Installing and Using Utilities 5-11
Management of Server Operation Status
NEC ESMPRO Agent manages and monitors a variety of components installed in the server. You
can view the information managed and monitored by NEC ESMPRO Agent on the data viewer of
NEC ESMPRO Manager.
NEC ESMPRO Agent also manages and monitors all the components and conditions required to
keep the server reliability at a high level such as hard disks, CPU, memory, fans, power supply, and
temperature.
Below is a list of functions of data viewer’s items and their availability if NEC ESMPRO Agent is
installed.
Function name Supported Function description
Hardware
c
Function to display physical information of hardware
Memory bank
c
Function to display physical information of memory
Device
Information
c
Function to display device-specific information
CPU
c
Function to display physical information of CPU
System
c
Function to view logical information or monitor load
rate of CPU
Function to view logical information or monitor status of
memory
I/O device
c
Function to view information of I/O devices (floppy disk
drive, serial port, parallel port, keyboard, mouse and
video)
System environment
'
Function to monitor temperature, fan, voltage, power,
door, etc.
Temperature
c
Function to monitor the temperature inside the cabinet
Fan
c
Function to monitor fan
Voltage
c
Function to monitor the voltage inside the cabinet
Power
¯
Function to monitor power unit
Door
¯
Function to monitor the Chassis Intrusion (open/close
of the cover/door on the cabinet)
Software
c
Function to view information of service, driver, OS
Network
c
Function to view information about network (LAN) and
monitor packets
Extension device
c
Function to view information of extension bus device
BIOS
c
Function to view BIOS information
Local polling
c
Function to monitor any MIB item value which the
agents get
To Next Page
Loading...
Need help?
General
