NEC Express5800 Series User Manual

Installing and Using Utilities 5-27
Monitoring IO Module
To monitor the IO modules and the components on the IO modules, refer to the [PCI Module] tree.
To see the information on the [PCI Module] tree, select the target IO module from [PCI Module] in
the [ft] tree.
You can see the following information on the IO modules and the components on the IO modules of
the [PCI Module] tree.
(This section describes the general information screens of the IO modules. The components on the
IO modules are described later.)
 General
Allows the configuration and other information of the IO modules to be viewed.
 Maintenance
Allows the start/stop, MTBF information clear, and diagnostics of the IO modules to be
provided. See "Maintenance of NEC Express5800/ft series" described later for the start/stop and
MTBF information clear of the IO modules.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)