NEC Express5800 Series User Manual

7-40 Troubleshooting
4. Execute the following command:
./xrasutil
ESRAS Utility will start.
5. Select <Backup the current IPMI Information…>.
The IPMI Information Backup screen will appear.
6. Enter an output destination and a comment, and then select [OK].
The information will be output to the specified location.
<Backup File Name>: Specify the path to the file on which you want to save the
information. By default, the information is output to log/ipmi.dat
which is under the directory where NEC ESMPRO Agent is
installed.
<Comment>: Describe the information which you want to output with. (Optional)
For using the Server Maintenance Utility in Japanese, run the command below before starting it.
This command starts X Window and the screen will be displayed in the Japanese fonts.
init 5
If you star the Server Maintenance Utility without starting the X Window, messages displayed on
the console may affect the screen display. If the screen is not displayed properly, press Ctrl + L to
refresh the screen.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)