2-26 General Description
ᴾ
Power Supply Unit Error LED
This LED illuminates in amber when the corresponding power supply unit located at the rear of the
server has a problem.
ᴾ
Voltage Error LED
This LED illuminates in amber when the voltage of the CPU/IO module is not within an appropriate
range.
ᴾ
Heart Warning LED
This LED illuminates in amber when the temperature in the CPU/IO module is not within an
appropriate range.
ᴾ
HCS 1 Error LED
Unavailable
ᴾ
HCS 2 Error LED
Unavailable
ᴾ
Access LED on the CD-ROM Drive
This LED illuminates when the installed CD-ROM is being accessed.
ᴾ
Hard Disk Drive LED
Each indication of the DISK LED on a hard disk drive bay has a different meaning.
Blinks in green: the hard disk drive is being accessed.
Illuminates in amber: the hard disk drive has failed.
Illuminates in green and amber in turn: the hard disk drive reconfiguration (rebuild) is ongoing. This
does not indicate the hard disk drive has a problem.
When the rebuilding is completed the LED goes off. If the rebuilding fails, the LED illuminates in
amber.
Blinks in amber: the hard disk drive has a mirror volume for which redundancy is not achieved (i.e.
mirrored configuration is in the degenerated mode).
To Next Page
Loading...
