NEC Express5800 Series User Manual

3-4 Linux Setup and Operation
3. See the path information in [General Information] of [SCSI Slot (ID: 41/1)].
It shows that PCI module, SCSI adapter, and SCSI bus are 10, 5, and 0,
respectively.
This allows you to find that SCSI Slot (ID: 41/1) belongs to Group 1. SCSI slots
under SCSI Enclosure (ID: 41) correspond to Group 1. Therefore, Group 2
corresponds to SCSI slots under SCSI Enclosure (ID: 42).
You will find that the failed disk located in the SCSI slot (ID: 41/2) is the second
disk of Group 1.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)