NEC Express5800 Series - Page 90

3-8 Linux Setup and Operation
5 -
Command Action
1 Bring Down(System Disk)
2 Bring Up(System Disk)
3 Status(System Disks)
9 <= Return
Command:9
(Restoring RAID)
Command Action
1 => RAID
2 => SCSI
9 Quit
Command:1
Command Action
1 New Disks
2 Remove Half Disk
3 Repair Disk
4 Remove Full Disks
5 Status(Raid)
6 Status(All Disks)
9 <= Return
Command:3
[Repair Disk]
Which scsi SLOT?[0-5]:3
Creating the partitions of /dev/hadb
mdadm: hot added /dev/hadb1
mdadm: hot added /dev/hadb2
mdadm: hot added /dev/hadb3
md0 is under repair.
Command Action
1 New Disks
2 Remove Half Disk
3 Repair Disk
4 Remove Full Disks
5 Status(Raid)
6 Status(All Disks)
9 <= Return
Command:5 <<< Confirm that the duplication process is started>>>
[Status(Raid)]
Name Partition Status Member
--------------------------------------------------
md1 / resync=DELAYED (0)hada2 -(3)hadb2
md2 recovery55.8% (0)hada3 -(3)hadb3
md0 /boot duplex (0)hada1 (3)hadb1