Linux Setup and Operation 3-13
2-2. Restart the dump partition
Run the following command to reboot the dump driver.
# /etc/init.d/diskdump restart
3. Formatting the dump partition
Run the following command to format the dump partition.
# /etc/init.d/diskdump initialformat
4. Registering a device to diskdump or removing it
4-1. Register a dump driver
# /usr/sbin/diskdumpctl /dev/hada6
4-2. Remove a dump driver
Run the following command to reboot the dump driver.
# /usr/sbin/diskdumpctl –u /dev/hada6
To Next Page
Loading...
