NETGEAR GS752TP - Page 109

Configuring Switching Information
109
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
• Disable. Packets with unknown destination multicast MAC addresses are processed.
4. Click APPLY to send the updated configuration to the switch.
Configuration changes take place immediately.
The following table displays information about the global IGMP snooping status.
Table 20. IGMP Snooping Status.
Field Description
VLAN IDs Enabled For IGMP
Snooping
Displays VLAN IDs enabled for IGMP snooping. For more information about
how to enable VLANs for IGMP snooping, see
IGMP Snooping VLAN
Configuration on page 110.
VLAN IDs Enabled For IGMP
Snooping Querier
Displays VLAN IDs enabled for IGMP snooping querier.
IGMP Snooping Table
To view all of the entries in the Multicast Forwarding Database that were created for IGMP
snooping, use the IGMP Snooping Table screen.
Select Switching Multicast  IGMP Snooping  IGMP Snooping Table. The following
screen displays:
The following table describes the fields in the IGMP Snooping Table.