NETGEAR GS752TP - SNMP V3 User Configuration

Configuring System Information
54
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
To access the Supported MIBS screen, select System  SNMP  SNMP v1/v2  Supported
MIBS.
SNMP v3 User Configuration
This is the configuration for SNMP v3.
The SNMPv3 Access Mode is a read-only field that shows the access privileges for the user
account. The admin account always has read/write access, and all other accounts have
read-only access.
 To configure SNMPv3 settings for the user account:
1. Select System
 SNMP  SNMP v3  User Configuration.