NETGEAR GS752TP User Manual

Managing Device Security
166
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
6. In the Connection Timeout field, specify the amount of time that passes before the
connection between the device and the TACACS+ server times out.
The field range is 1–30 seconds. The default value is 5.
7. Click ADD.
Note: The ADD option is available if fewer than five TACACS+ servers are
configured on the system.
After you add one or more TACACS+ servers, more fields appear on the TACACS+
Server Configuration screen.
Authentication List Configuration
The Authentication List link provides access to screens where you can configure the default
login list. A login list specifies one or more authentication methods to validate switch or port
access for the admin user.
Note: Admin is the only user on the system and is assigned to a
preconfigured list named defaultList, which you cannot delete.
The Authentication List link provides access to the features described in the following
sections:
• HTTP Authentication List
• HTTPS Authentication List
HTTP Authentication List
Use the HTTP Authentication List screen to configure the default HTTP login list.
 To change the HTTP authentication method for the default list:
1. Select Security
 Management Security Authentication List > HTTP Authentication
List.

NETGEAR GS752TP Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Number of multicast groups filtered	1024
Fiber optic connector	SFP
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
10G support	-
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
MAC address table	8000 entries
Packet buffer memory	8 MB
Number of static routes	32
Supported network protocols	IPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)	384 W
Safety	CE, CSA, UL
Product color	Gray
Electromagnetic compatibility	CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)	220447 h
Heat dissipation	1750.70 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	15.4 W
Power over Ethernet plus (PoE+) ports quantity	8
Cables included	AC

Weight and Dimensions

Depth	316 mm
Width	440 mm
Height	43 mm
Weight	5100 g