NETGEAR GS752TP - Management

Configuring System Information
26
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Management
This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. From the Management menu, you can access screens described in the following
sections:
• System Information
• IP Configuration
• IPv6 Network Configuration
• IPv6 Network Neighbors
• Time
• DNS
• Green Ethernet Configuration
System Information
After a successful login, the System Information screen displays. Use this screen to configure
and view general device information.
 To define system information:
1. Select System
 Management System Information.
The following screen displays:
2. Define the following fields:
• System Name. Enter the name you want to use to identify this switch. Y
ou can use
up to 160 alphanumeric characters. The factory default is blank.