NETGEAR GS752TP - DHCP Snooping Persistent Configuration

Configuring System Information
72
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
DHCP Snooping Persistent Configuration
 To configure DHCP snooping persistent settings:
1. Select System
 Services  DHCP Snooping  Persistent Configuration.
The following screen displays:
2. Next to the Local Store, select Enable or Disable to determine if the binding table is stored
locally.
3. In the Write Delay field, enter the maximum write time to write to the database locally, in
seconds.
The valid range is 600–86400.
4. Click APPLY to apply the change to the system.
Configuration changes take effect immediately
.
VLAN ID The VLAN for the binding entry in the binding database. The valid range
of the VLAN ID is 1–4093.
IP Address The IP address for the binding entry in the binding database.
Lease Time
The remaining lease time for the dynamic binding entries.
Field Description