Managing Device Security
170
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Configure Management Access
From the Access tab, you can configure HTTP and Secure HTTP access to the switch
management interface. You can also configure access control profiles and access rules.
The Access tab contains links features described in the following sections:
• HTTP Configuration
• Secure HTTP Configuration
• Certificate Management
• Access Control
HTTP Configuration
Use the HTTP Configuration screen to configure the HTTP server settings on the system.
To configure the HTTP server settings:
1. Select Security > Access > HTTP
HTTP Configuration.
The following screen displays:
2. In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session
can be idle before a time-out occurs.
After the session is inactive for the configured amount of time, the administrator is
automatically logged out and must reenter the password to access the management
interface. A value of zero corresponds to an infinite timeout. The default value is 5
minutes.
The maximum number of HTTP sessions is 5.
To Next Page
Loading...
