NETGEAR GS752TP - DHCP Snooping Binding Configuration

Configuring System Information
70
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2. In the Go To Interface field, enter the interface name and click the Go button.
The entry corresponding to the specified interface is selected.
3. To configure DHCP snooping interface settings, click PORTS, LAGS
, or All.
4. Select the check box next to the port or LAG to configure.
You can select multiple ports and LAGs to apply the same setting to the selected
interfaces.
To apply the same settings to all interfaces, select the check box in the
heading row
.
5. Select the Trust Mode for the selected ports or LAGs.
If you select Enable, DHCP snooping application considers the port as trusted.
The
factory default is disabled.
6. Click APPLY to apply the change to the system.
Configuration changes take effect immediately
.
DHCP Snooping Binding Configuration
 To configure DHCP binding settings:
1. Select System
 Services  DHCP Snooping  Binding Configuration.