EasyManuals Logo

NETGEAR GS752TP User Manual

NETGEAR GS752TP
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
Managing Device Security
188
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Configure Access Control Lists
Access control lists (ACLs) ensure that only authorized users have access to specific
resources while blocking any unwarranted attempts to reach network resources. ACLs are
used to provide traffic flow control, restrict contents of routing updates, decide which types of
traffic are forwarded or blocked, and above all provide security for the network. The switch
software supports IPv4 and MAC ACLs.
To configure an ACL, first create an IPv4-based or MAC-based ACL ID. Then, create a rule
and assign it to a unique
ACL ID. Next, define the rules, which can identify protocols, source,
and destination IP and MAC addresses, and other packet-matching criteria. Finally
, use the
ID number to assign the ACL to a port or to a LAG.
The ACL menu provides access to features described in the following sections:
ACL Wizard
MAC ACL
MAC Rules
MAC Binding Configuration
MAC Binding Table
IP ACL
IP Rules
IP Extended Rules
IPv6 ACL
IPv6 Rules
IP Binding Configuration
IP Binding Table
ACL Wizard
ACL Wizard helps you to create a simple ACL and apply it to the selected ports easily and
quickly. First, you can select an ACL type. Then, you can add an ACL rule to this ACL, and
the rule can be applied to this ACL on the selected ports. The ACL Wizard enables you to
create the ACL, but does not allow you to modify it. For more information about how to modify
the ACL, see the instructions on the ACL configuration screen.
To create an ACL:
1. Select Security
ACL ACL Wizard.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS752TP and is the answer not in the manual?

NETGEAR GS752TP Specifications

General IconGeneral
Switch typeManaged
Switch layerL3
Quality of Service (QoS) supportYes
Number of multicast groups filtered1024
Fiber optic connectorSFP
SFP module slots quantity4
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity48
10G support-
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology1000BASE-T, 100BASE-T, 10BASE-T
DHCP featuresDHCP client
MAC address table8000 entries
Packet buffer memory8 MB
Number of static routes32
Supported network protocolsIPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)384 W
SafetyCE, CSA, UL
Product colorGray
Electromagnetic compatibilityCE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)220447 h
Heat dissipation1750.70 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 55 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)10 - 90 %
Total Power over Ethernet (PoE) budget15.4 W
Power over Ethernet plus (PoE+) ports quantity8
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth316 mm
Width440 mm
Height43 mm
Weight5100 g

Related product manuals