NETGEAR GS752TP - Reset

Maintenance
227
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Reset
The Reset menu contains links that provide access to the features described in the following
sections:
• Device Reboot
• Factory Default
Device Reboot
Use the Device Reboot screen to reboot the switch.
 To reboot the switch:
1. Select Maintenance
 Reset  Device Reboot.
The following screen displays:
2. Select the check box.
3. Click APPLY.
The switch resets immediately.
The management interface is not available until the switch completes the boot cycle.
After
the switch resets, the login screen appears.
Factory Default
Use the Factory Default screen to reset the system configuration to the factory default
values.