Maintenance
228
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Note: If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory defaults,
see Connect the Switch to the Network on page 11.
To reset the switch to the factory default settings:
1. Select Maintenance
Reset Factory Default.
The following screen displays:
2. Select the check box.
3. Click APPLY.
The switch resets immediately.
To Next Page
Loading...
