NETGEAR GS752TP - Sntp Server Configuration

Configuring System Information
34
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Table 5. SNTP Global Status fields.
Field Description
Version Specifies the SNTP version the client supports.
Supported Mode Specifies the SNTP modes the client supports. Multiple modes might be
supported by a client.
Last Update Time Specifies the local date and time (UTC) the SNTP client last updated the
system clock.
Server IP Address Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server
, an empty string is shown.
Address Type Specifies the address type of the SNTP server address for the last received
valid packet.
Server Stratum Specifies the claimed stratum of the server for the last received valid packet.
Server Mode Specifies the mode of the server for the last received valid packet.
Unicast Server Max Entries Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured for
this client.
SNTP Server Configuration
Use the SNTP server configuration screen to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
 To configure a new SNTP server:
1. Select System
 Management  Time  SNTP Server Configuration.