Getting Started
9
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Getting Started with the NETGEAR Switch
This chapter provides an overview of starting your NETGEAR switch and accessing the user
interface. It also describes some actions that can be performed in the Smart Control Center
(SCC) application, which can be downloaded to your computer.
This guide does not document the SCC application. Full documentation for SCC is found at
http://docs.netgear.com/scc/enu/202-10685-01/index.htm.
This chapter contains the following sections:
• Switch Management Interface
• Connect the Switch to the Network
• Discover a Switch in a Network with a DHCP Server
• Switch Discovery in a Network Without a DHCP Server
• Configure the Network Settings on the Administrative System
• Access the Management Interface from the Web
• Interface Naming Convention
To Next Page