NETGEAR GS752TP User Manual

Getting Started
17
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
Access the Management Interface from the Web
To access the switch management interface, use one of the following methods:
• From the Smart Control Center, select the switch and click Web Browser
Access. For
more information, see the documentation for this application at
http://docs.netgear.com/scc/enu/202-10685-01/index.htm.
• Open a web browser and enter the IP address of the switch in the address field.
You must be able to ping the IP address of the NETGEAR switch management interface from
your administrative system for web access to be available. If you used the Smart Control
Center to set up the IP address and subnet mask, either with or without a DHCP server, use
that IP address in the address field of your web browser
. If you did not change the IP address
of the switch from the default value, enter 192.168.0.239 into the address field.
Clicking Web Browser Access on the Smart Control Center or accessing the switch directly
from your web browser displays the Login screen.
Understand the User Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
• Internet Explorer version 7 or later
• Firefox version 4 or later
 To log on to the web interface:
1. Open a web browser and enter the IP address of the switch in the web browser address
field.
2. The factory default password is password.
T
ype the password in the field on the Login
screen and click Login. Passwords are case-sensitive.
3. After the system authenticates you, the System Information screen displays.

NETGEAR GS752TP Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Number of multicast groups filtered	1024
Fiber optic connector	SFP
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
10G support	-
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
MAC address table	8000 entries
Packet buffer memory	8 MB
Number of static routes	32
Supported network protocols	IPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)	384 W
Safety	CE, CSA, UL
Product color	Gray
Electromagnetic compatibility	CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)	220447 h
Heat dissipation	1750.70 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	15.4 W
Power over Ethernet plus (PoE+) ports quantity	8
Cables included	AC

Weight and Dimensions

Depth	316 mm
Width	440 mm
Height	43 mm
Weight	5100 g