NETGEAR GS752TP User Manual

Getting Started
16
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
WARNING:
When you change the IP address of your administrative system,
connection to the rest of the network is lost. Be sure to write down
your current network address settings before you change them.
 To modify the network settings on your administrative system:
1. On your computer, access the Windows operating system TCP/IP Properties screen.
2. Set the IP address of the administrative system to an address in the 192.168.0.0 network,
such as 192.168.0.200.
The IP address must be dif
ferent from the switch’s address but within the same subnet.
3. Click OK.
 To configure a static address on the switch:
1. Use a straight-through cable to connect the Ethernet port on the administrative system
directly to any port on the NETGEAR switch.
2. Open a web browser on your computer and connect to the management interface.
For more information, see Access the Management Interface from the Web on page 17.
3. Change the network settings on the switch to match the settings on your network.
For more information, see IP Configuration on page 27.
4. Return the network configuration on your administrative system to the original settings.

NETGEAR GS752TP Specifications

General

Switch type	Managed
Switch layer	L3
Quality of Service (QoS) support	Yes
Number of multicast groups filtered	1024
Fiber optic connector	SFP
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	48
10G support	-
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Copper ethernet cabling technology	1000BASE-T, 100BASE-T, 10BASE-T
DHCP features	DHCP client
MAC address table	8000 entries
Packet buffer memory	8 MB
Number of static routes	32
Supported network protocols	IPv4, IPv6, TFTP, SNTP, TACACS+
Power consumption (typical)	384 W
Safety	CE, CSA, UL
Product color	Gray
Electromagnetic compatibility	CE, FCC, Class A EN 55022, Class A C-Tick, EN 50082-1, EN 55024, CCC
Mean time between failures (MTBF)	220447 h
Heat dissipation	1750.70 BTU/h
Operating altitude	0 - 3000 m
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Total Power over Ethernet (PoE) budget	15.4 W
Power over Ethernet plus (PoE+) ports quantity	8
Cables included	AC

Weight and Dimensions

Depth	316 mm
Width	440 mm
Height	43 mm
Weight	5100 g